a study on the influence of curing on the strength of a

(PDF) A study on the influence of curing on the

The results of the studies showed, the immersion curing gave that better strength compared with other two types of curing. (Rao et al, 2010) [8] Study the influence of curing on the strength of a ...

A STUDY ON THE INFLUENCE OF CURING ON THE

2010-7-9  A Study on the Influence of Curing on the Strength of a Standard Grade Concrete Mix 27 4.4 Tests on Concrete a) Fresh Concrete: Slump test and Compaction factor tests were employed to evaluate the workability of concrete [20]. The details are shown in

A STUDY ON THE INFLUENCE OF MOISTURE CURING

2015-7-7  ICE Virtual Library essential engineering knowledge. Cart. Mobile

A study on the influence of curing on the strength of a ...

Curing by membrane forming curing compound yielded nearly the same results as that of conventional wet curing for concrete with OPC and there was a marginal decrement in concrete with PPC. Predicted 28-day strength of concrete from the accelerated curing test was found to be on a conservative side compared to control concrete

CiteSeerX — A STUDY ON THE INFLUENCE OF

Curing by membrane forming curing compound yielded nearly the same results as that of conventional wet curing for concrete with OPC and there was a marginal decrement in concrete with PPC. Predicted 28-day strength of concrete from the accelerated curing test was found to be on a conservative side compared to control concrete.

Experimental Study on Influence of Curing Time on

A study of the influence of supports on the tensile strength of SLA-printed samples was reported by Kazemi and Rahimi . In the paper, it was proven that supporting structures influence the tensile strength by increasing the roughness of the sample surface.

Influence of curing methods and concentration of

2014-9-15  Efficiency in energy-utilization in the adoption of curing methods and effects of NaOH aq concentration towards achieving a better strength performance in the synthesis of alkaline activated ground-steel-slag (GSS) with ultrafine palm-oil-fuel ash (UPOFA) – (AAGU) mortars and concrete prompted this study. AAGU samples were prepared with the combined activators (Na 2 SiO 3aq +

The Influence of Curing Systems on the Cure ...

The goal of this work is to study the influence of different curing systems on the cure characteristics and performance of styrene-butadiene elastomer (SBR) filled with carbon black or nanosized silica. A multifunctional additive for rubber compounds, namely Activ8, was applied as an additional acti

The Determination of the Influence of pH Value of

2016-1-1  The influence of initial water curing on the strength development of ordinary portland and pozzolanic cement concretes Cement Concrete Res. , 34 ( 2004 ) , pp. 13 - 18 Article Download PDF View Record in Scopus Google Scholar

Experimental Study on Influence of Curing Time on

Experimental Study on Influence of Curing Time on Strength Behavior of SLA-Printed Samples Loaded with Different Strain Rates . by Danuta Miedzińska *, Roman Gieleta. and . Arkadiusz Popławski. Faculty of Mechanical Engineering, Military University of Technology, Kaliskiego 2 St., 00-908 Warsaw, Poland *

The influence of curing conditions on the strength of ...

2020-2-3  It has been found that 3 out of 4 adhesive compounds examined in the study show the highest tensile strength when not cured in room conditions (curing variant IV). Therefore, it may be claimed that high-temperature curing has a positive effect on the strength of adhesive compounds.

INFLUENCE OF CURING MEDIA ON THE COMPRESSIVE

The influence of curing media on the compressive strength of palm kernel shell concrete with varying coarse aggregate sizes (5-10 mm, 5-14 mm and 5-20 mm) and replacement level of granite with palm kernel shell (0-100 % in steps of 25 %) were investigated in this study. The results showed that the compressive strength was

Experimental Study on the Influence of Curing

2016-6-3  This paper presents an experimental study on the influence of four curing conditions, i.e., standard curing, natural curing, water curing, and sealed curing, on the capillary absorption of normal concrete. Compressive strength tests on the cylinder specimens that

Influence of Curing Humidity on the Compressive

The study indicates that the curing humidity has a significant influence on the similar material strength, which is mainly attributed to the fact that the humidity affects the water environment of gypsum hydration inside specimens.

Influence of Curing Temperature on Strength of Cement ...

2021-1-18  the influence of constant curing temperature. For the study of the influence of changing curing temperature, all specimens were cured for 28 days according to the curing plans presented in Table 1. After curing, UCS tests were conducted to measure the strength of the specimens. Table 1. Curing plans for the study of the influence of changing ...

STUDY ON THE INFLUENCE OF ACCELERATED

2020-7-15  strength of the cement paste, however didn't influence the later-age strength. Microwave curing decreased the energy utilization and curing time. For all intents and purposes, microwave-helped relieving has been end up being a valuable procedure for construction applications and for fixing harmed concrete asphalts.

Effect of light-curing distance and curing time on ...

This study investigated the influence of curing distance on µ-flexural strength (µ-FS) of a nano-hybrid composite, cured using the manufacturer-recommended curing time (MCT), compared to a consistent radiant exposure (CRE) using three different light-curing units (LCUs). Beams (6×2×1 mm) were cured

Influence of internal curing on the pore size

2018-12-20  In this study, the slump-flow and setting time were measured to determine if pre-wetted ELWA has any influence on the initial properties of fresh concrete. Furthermore, the compressive strength was measured at different ages to investigate the dependency of compressive strength on curing time. The results of these tests are listed in Table 3 ...

An experimental study of different curing methods on

2018-10-9  The main purpose of this study is to investigate the curing technique on the application of HVGGBFS (High volume ground granulated blast furnace slag) to improve the mechanical properties of concrete. The mechanical properties of the HVGGBFS concrete were evaluated considering the influence of curing time and different curing methods. In this study, a compressive strength, split tensile ...

Influence of Specimen Size on Effect of Curing Regime

1992-12-7  The compressive strength of 70‐, 120‐, 200‐, and 250‐mm concrete cubes, subjected to four different curing regimes, was determined at the ages of 28 and 90 days, in order to study the influence of specimen size on the effect of curing regimes on cube strength. In the first curing regime the specimens were exposed unprotected to 30°C/40 ...

An experimental study on the influence of curing ...

This paper focus on the behavior of autogenous shrinkage of high strength/performance concrete with water cement ratio of 0.3 and slump flow of 500mm based on the experiment under 4 different curing temperatures (10#x00B0;C; 20#x00B0;C;, 28#x00B0;C;, 35#x00B0;C;). The influence of curing temperature on autogenous shrinkage strain and strain rate was discussed; the usability of evaluation ...

Influence of Curing Temperature on Strength of

To study the influence of curing temperature on the strength of the treated soil, specimens were cured in temperature-controlled water baths for the desired curing time. After curing, unconfined compressive strength (UCS) tests were conducted on the specimens.

(PDF) Influence of Different Curing Ways on the

The influence of curing is immensely important on the properties of concrete, especially the complete process of the cement hydration that brings hardened concrete and more durability. In this present work comprises the comparison curing influence

Influence of Curing Humidity on the Compressive

The study indicates that the curing humidity has a significant influence on the similar material strength, which is mainly attributed to the fact that the humidity affects the water environment of gypsum hydration inside specimens.

Influence of Curing Temperature on Strength of Cement ...

2021-1-18  the influence of constant curing temperature. For the study of the influence of changing curing temperature, all specimens were cured for 28 days according to the curing plans presented in Table 1. After curing, UCS tests were conducted to measure the strength of the specimens. Table 1. Curing plans for the study of the influence of changing ...

An experimental study of different curing methods on

2018-10-9  The main purpose of this study is to investigate the curing technique on the application of HVGGBFS (High volume ground granulated blast furnace slag) to improve the mechanical properties of concrete. The mechanical properties of the HVGGBFS concrete were evaluated considering the influence of curing time and different curing methods. In this study, a compressive strength, split tensile ...

STUDY ON THE INFLUENCE OF ACCELERATED

2020-7-15  strength of the cement paste, however didn't influence the later-age strength. Microwave curing decreased the energy utilization and curing time. For all intents and purposes, microwave-helped relieving has been end up being a valuable procedure for construction applications and for fixing harmed concrete asphalts.

Influence of Different Curing Conditions on Strength ...

2004-5-1  Title: Influence of Different Curing Conditions on Strength Development of High-Strength Concrete Using Fly Ash Author(s): F.-R. Wu, Y. Masuda, and S. Nakamura Publication: Symposium Paper Volume: 221 Issue: Appears on pages(s): 181-194 Keywords: compressive strength; density; fly ash; long-term strength; moisture curing Date: 5/1/2004 Abstract: In this study, the influence of moist curing

Influence of Specimen Size on Effect of Curing Regime

1992-12-7  The compressive strength of 70‐, 120‐, 200‐, and 250‐mm concrete cubes, subjected to four different curing regimes, was determined at the ages of 28 and 90 days, in order to study the influence of specimen size on the effect of curing regimes on cube strength. In the first curing regime the specimens were exposed unprotected to 30°C/40 ...

Journal of International Dental and Medical Research

2018-9-5  This study was conducted to determine the influence of LED curing time and the color shade of the bulk-fill composite resins on the diametral tensile strength. Diametral tensile strength is an important mechanical force in the process of mastication.8,9 The diametral tensile strength values obtained in this study

Copyright © 2020.Company name All rights reserved.SiteMap